Soot behaves differently on porous drywall than it does on non-porous tile or metal, and our Cliffside Park, NJ technicians adjust technique accordingly.
📞 Call +1-866-484-1409 Now
This avoids the streaking that comes from wiping soot with a cloth.
We match method to material, not the other way around.
Soot turns corrosive on metal within about 48 hours — we move quickly.
Standard vacuums push soot particles back into the air — ours don't.

Sponges are swapped frequently, since a saturated sponge starts redepositing particulate.
Fine soot pulled from carpet, upholstery, and HVAC returns before any wet cleaning begins.
Tile, glass, and metal respond well to solvent cleaners that would stain something more absorbent.
We prioritize metal surfaces early because the corrosion clock starts immediately.
Ceilings get cleaned first so falling residue doesn't recontaminate clean walls.
Cleaned on the same visit, not a separate appointment.
A technician answers and mobilizes the fastest available crew.
Mobile units are equipped for both porous and non-porous surfaces.
You approve the scope before any sponge touches a surface.
Cleaning proceeds surface by surface with a final walkthrough.
"Our own attempt made the streaks worse — the sponge technique they used actually worked." — Homeowner, Cliffside Park
"Fast response meant our fixtures got treated before corrosion set in." — Homeowner, Cliffside Park, NJ
"The HEPA vacuuming before the wet cleaning made a noticeable difference — our carpets came out cleaner than expected." — Homeowner, Cliffside Park
Wiping tends to smear fine particulate deeper into porous surfaces.
Ideally within 48 hours, since acidic residue starts pitting metal after that.
Yes, porous and non-porous surfaces respond to completely different agents.
Cleaning reduces odor, but persistent smell may need a separate treatment step.
Carpets get vacuumed first to prevent smearing during later steps.
We keep response times short across Cliffside Park because soot corrosion is time-sensitive.
